Series Dual

Serie Professional Dual 800/E900
These Multi-Carrier Dual Band repeaters are designed to provide coverage in 2, 3, and 4G LTE modes for data and voice traffic in standard and VoLTE modes. Available in three powers of 23, 27, and 30 dBm respectively in the Professional Light 800/900E, Professional 800/900E, and Professional Power 800/900E models They use the 4G LTE standard at 800 MHz and 2G at 900 MHz; on the latter frequency, where present, it is also able to repeat the 3G standard.

  • Network: 800/E900 MHz;
  • Data in 4G LTE and voice in VoLTE mode/Data and voice in 2 and 3G modes;
  • Suitable for medium-sized environments;
  • Compatible with all EU mobile providers;
  • CE, RoHS, and Radio Equipment Directive 2014/53/EU (RED) certifications;
  • Control via WEB interface, ETH port for remote control.
800/E900 Mhz
70/75dB, 75/80dB
23/27/30dBm
Installation
Intelligent
RED

Descrizione

Made with intelligent radio system ® technology, they can be assembled and be in an optimal condition easily. The Professional Light Dual 800/900E model, with its 2×200 mW of power, ensures efficient coverage, managing to serve surfaces of over 350-400 m2. They have the new RED Directive (Radio Equipment Directive) 2014/53/EU certification and include the remote control system via IP as standard equipment. The Professional Dual 800/900E series can be equipped with different types of internal and external antennas to allow better coverage in larger environments. Where present externally, it regenerates the 2, 3G and 4G LTE signals at 800 and 900 MHz from the operators Wind-3, TIM, Vodafone, and Iliad.

Specifications

 UplinkDownlink
Frequency Range832-862/880-9915 MHZ791-821/925-960 MHZ
Bandwidth30/35 MHz
Maximum Gain Professional Light70dB±3dB75dB±3dB
Output Power Professional Light 20dBm±2dB23dBm±2dB
Maximum Gain Professional70dB±3dB75dB±3dB
Output Power Professional23dBm±2dB27dBm±2dB
Maximum Gain Professional Power75dB±3dB80dB±3dB
Output Power Professional Power27dBm±2dB30dBm±2dB
Auto Gain Setup Range(Inside)31dB / 1dB Step
Power Consumption≦ 20W
Power SupplyDC 10V/6A 
Dimensions22*27*6cm
Weight≦3,5Kg / ≦5,7Kg / ≦6,8Kg
ConnectorsN-female 
Operating Temperature -10℃~55℃

Works

Signal amplification systems work on two separate frequencies: down-link and up-link. Down-link is the signal we receive on our cell phone from operator cells at a specific frequency while Up-link is the signal we transmit from the cell phone to the infrastructure of the various networks. The repeater by means of the external (or donor) antenna connected with a coaxial cable, picks up the signals from the operators' BTSs and amplifies them; then the enhanced and hardened signals are sent to the internal service antenna or antennas connected to the repeater, again by means of a coaxial cable. At this point the signal is ready to be used by your cell phone.
The system will transfer and amplify the signal from Vs cell phone (Up-Link) to the operators' cells with a reverse path from the previous one.

Installation

Main steps:
The installation of a signal amplification system must always and exclusively be carried out by specialized companies with the appropriate equipment.
“DO IT YOURSELF” in the absence of experience, competence, and the ability to carry out checks once the system is completed is a practice that should not be done under any circumstances.

Accessories