Series Professional

Serie Professional 2100
Professional 2100 Series are multi-carrier repeaters designed to provide 3 and 4G LTE coverage at 2100 MHz. Available in three powers of 23, 27, and 30 dBm respectively in the Professional Light 2100, Professional 2100, and Professional Power 2100 models.
The debut of the 2100 frequency at the end of 2008 represented the first concrete step towards broadband navigation for mobile telephony. The UMTS standard allowed transmission speeds of up to 384 Kbit/s and subsequently with the HSPA+ mode Download speeds of 56 Mbit/s and Upload speeds of 5.7 could be achieved.
Today, the 2100 MHz frequency is dedicated to data and voice traffic in VoLTE mode in the 4G standard and is still used by the operators WIND-3 and Iliad, also in the 3G standard. The aforementioned standard will close by the end of 2024 to make way for the entire 2100 MHz spectrum for 4G LTE.

  • Network: LTE 2100 MHz;
  • Data and voice in 4G VoLTE mode and if present in 3G standard;
  • Suitable for medium-sized environments;
  • Compatible with all EU mobile provider;
  • CE, RoHS, and Radio Equipment Directive 2014/53/EU (RED) certifications;
  • Control via WEB interface, ETH port for remote control.
2100 Mhz
70/75dB,75/80dB
23/27/30dBm
Installation
Intelligent
5Tacche®

Descrition

Made with Intelligent Radio System ® Technology, they can be assembled and be in an optimal condition easily. The Professional Light 2100 model with its 200 mW of power ensures efficient coverage, capable of serving surfaces of over 350-400 m2. They have the new RED (Radio Equipment Directive) 2014/53/EU certification and include the remote control system via IP as standard equipment. The Professional 2100 Series can be accessorized with different types of internal and external antennas to allow better coverage in larger environments. Where present outdoors, it amplifies the 3 and 4G LTE signals of the Wind-3, TIM, Vodafone, and Iliad operators.

Specifications

 UplinkDownlink
Frequency Range1920-1980MHZ2110-2170MHZ
Bandwidth60MHz
Maximum Gain Professional Light70dB±3dB75dB±3dB
Output Power Professional Light 20dBm±2dB23dBm±2dB
Maximum Gain Professional70dB±3dB75dB±3dB
Output Power Professional23dBm±2dB27dBm±2dB
Maximum Gain Professional Power75dB±3dB80dB±3dB
Output Power Professional Power27dBm±2dB30dBm±2dB
Auto Gain Setup Range(Inside)31dB / 1dB Step
Power Consumption≦ 20W
Power SupplyDC 10V/6A 
Dimensions22*27*6cm
Weight≦3,5Kg
ConnectorsN-female 
Operating Temperature -10℃~50℃

Works

Signal amplification systems work on two separate frequencies: down-link and up-link.
Down-link is the signal we receive on our cell phone from operator cells at a specific frequency while Up-link is the signal we transmit from the cell phone to the infrastructure of the various networks.
The repeater by means of the external (or donor) antenna connected with a coaxial cable, picks up the signals from the operators' BTSs and amplifies them; then the enhanced and hardened signals are sent to the internal service antenna or antennas connected to the repeater, again by means of a coaxial cable. At this point the signal is ready to be used by your cell phone.
The system will transfer and amplify the signal from Vs cell phone (Up-Link) to the operators' cells with a reverse path from the previous one.

Installation

Main steps::
The installation of a signal amplification system must always and exclusively be carried out by specialized companies with the appropriate equipment.
“DO IT YOURSELF” in the absence of experience, competence, and the ability to carry out checks once the system is completed is a practice that should not be done under any circumstances.

Accessories