Series Domus

Domus LTE 1800-Intelligent Sistem®
These multi-carrier repeaters are designed to provide coverage on the new 4G LTE standard at 1800. Together with 900 Mhz, it represented the first implementation of the 2G network and allowed operators to significantly increase the number of channels available thanks to this standard called DCS. Available with a power of 17 dBm in DL and 13 dBm in UL and a Gain of 65 dB in DL and 60 dB in UL. Mainly dedicated to data transmission and voice traffic in VoLTE mode, the 1800 MHz frequency is used by all operators, including ILIAD. Compared to LTE 800, it propagates less but has greater performance and is therefore more widespread in urban areas; it is often also present in exurban areas close to cities.

  • Network: LTE 1800 MHz;
  • Data and voice in 4G VoLTE mode and if present in 3G standard;
  • Suitable for small environments;
  • Compatible with all EU mobile providers;
  • CE, RoHS, and Radio Equipment Directive 2014/53/EU (RED) certifications;
  • Control via WEB interface, ETH port for remote controlo.
1800 Mhz
60/65dB
17dBm
Installation
Intelligent
5Tacche®

Description

Made with Intelligent Radio System ® Technology, they can be assembled and be in an optimal condition easily. The Domus 1800 model, with its 17 dBm of power, ensures efficient coverage in the home or small environments, capable of serving surfaces of over 250-300 m2. The Domus LTE 1800 series can be equipped with different types of internal and external antennas to allow better coverage in larger environments. Where present outdoors, it amplifies the 3G and 4G LTE signals of the operators Wind-3, TIM, Vodafone, and Iliad

Specification

<
 UplinkDownlink
Frequency Range1710-1785MHZ1805-1880MHZ
Bandwidth75 MHz
Maximum Gain60dB±3dB65dB±3dB
Auto Gain Setup Range(Inside)31dB / 1dB Step
Output Power  17dBm±2dB
Power Consumption≦ 20W
Power SupplyDC 4A/9V 
Dimensions21*17*5cm
Weight≦1,5Kg
ConnectorsN-female 
Operating Temperature -10℃~50℃

Works

Signal amplification systems work on two separate frequencies: down-link and up-link. Down-link is the signal we receive on our cell phone from operator cells at a specific frequency while Up-link is the signal we transmit from the cell phone to the infrastructure of the various networks. The repeater by means of the external (or donor) antenna connected with a coaxial cable, picks up the signals from the operators' BTSs and amplifies them; then the enhanced and hardened signals are sent to the internal service antenna or antennas connected to the repeater, again by means of a coaxial cable. At this point the signal is ready to be used by your cell phone.
The system will transfer and amplify the signal from Vs cell phone (Up-Link) to the operators' cells with a reverse path from the previous one.

Installation

Main steps:
The installation of a signal amplification system must always and exclusively be carried out by specialized companies with the appropriate equipment. “DO IT YOURSELF” in the absence of experience, competence, and the ability to carry out checks once the system is completed is a practice that should not be done under any circumstances. Inside the package, there is an installation manual in Italian with all the information necessary to carry out the correct assembly.

Accessories