Series Domus

Domus LTE800- Intelligent Sistem®
These multi-carrier repeaters are designed to provide coverage on the new 800 MHz LTE standard.
Available with a power of 17 dBm in DL and 13 dBm in UL and a Gain of 65 dB in DL and 60 dB in UL.
Dedicated to data and voice transmission in 4G VoLTE mode, the 800 MHz frequency, although less performing in terms of speed, has the advantage of propagating more effectively and over greater distances.
Initially used to provide coverage in exurban areas, it is currently increasingly present in cities too.

  • Network: LTE 800 MHz;
  • Data and voice in 4G VoLTE mode;
  • Suitable for small environments;
  • Compatible with all EU mobile providers;
  • CE, RoHS, and Radio Equipment Directive 2014/53/EU (RED) certifications;
  • Control via WEB interface, ETH port for remote control.
800 Mhz
60/65dB
17dBm
Installation
Intelligent
5Tacche®

Description

Made with Intelligent Radio System® Technology, they can be assembled and be in an optimal condition easily. The Domus model, with its 17 dBm of power, ensures efficient coverage, capable of serving surfaces of 350-400 m2. Depending on the type of need, the Domus 800 series can be equipped with different types of internal and external antennas to allow better coverage in larger environments.Where present outdoors, it amplifies the LTE signals of Wind-3, TIM, and Vodafone operators.

Specifiche

 UplinkDownlink
Frequency Range832-862MHZ791-821MHZ
Bandwidth30MHZ
Maximum Gain60dB±3dB65dB±3dB
Auto Gain Setup Range(Inside)31dB / 1dB Step
Output Power  17dBm±2dB
Power Consumption≦ 20W
Power SupplyDC 4A/9V 
Dimensions21*17*5cm
Weight≦1,5Kg
ConnectorsN-female 
Operating Temperatures -10℃~50℃

Works

Signal amplification systems work on two separate frequencies: down-link and up-link. Down-link is the signal we receive on our cell phone from operator cells at a specific frequency while Up-link is the signal we transmit from the cell phone to the infrastructure of the various networks. The repeater by means of the external (or donor) antenna connected with a coaxial cable, picks up the signals from the operators' BTSs and amplifies them; then the enhanced and hardened signals are sent to the internal service antenna or antennas connected to the repeater, again by means of a coaxial cable. At this point the signal is ready to be used by your cell phone.
The system will transfer and amplify the signal from Vs cell phone (Up-Link) to the operators' cells with a reverse path from the previous one.

Installation

Main steps:
The installation of a signal amplification system must always and exclusively be carried out by specialized companies with the appropriate equipment. “DO IT YOURSELF” in the absence of experience, competence, and the ability to carry out checks once the system is completed is a practice that should not be done under any circumstances. Inside the package, there is an installation manual in Italian with all the information necessary to carry out the correct assembly.

Accessories